Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Kasilof, AK
The certificated private pilot was departing a private 2,000 feet long grass airstrip. Before departure, the pilot selected the left fuel tank. During the initial climb, the engine suddenly quit about 100 feet in the air. The pilot selected an emergency landing area, and the airplane collided with several trees during the landing. The pilot indicated that the remanufactured engine that he installed had accrued 25 hours. The airplane had been rebuilt by the pilot, who was not a certificated airframe or powerplant mechanic. The pilot did not possess any airworthiness documentation for the airplane. A postaccident examination of the airplane revealed a kink in the fuel line from the left fuel tank. The fuel line from the fuel strainer to the carburetor was 1/4 inch in diameter. The standard size was 3/8 inch. The fuel caps on each tank were required to have a 3/8 inch vent line. The installed caps had a 1/4 inch vent.
fuel starvation due to a kinked fuel supply line from the left main tank, and the pilot's improper rebuild/remanufacture of the airplane. A smaller than standard fuel line from the fuel strainer to the carburetor, a smaller than standard fuel cap vent, and a lack of mechanic certification were factors in the accident.
On April 28, 1996, about 1500 Alaska daylight time, a wheel equipped Piper PA-18, N1930A, collided with trees during a forced landing, about 5 miles northwest of Kasilof, Alaska. The airplane was being operated as a visual flight rules cross-country personal flight when the accident occurred. The airplane, operated by the pilot, sustained substantial damage. The certificated private pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed. In a telephone interview with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC), the pilot reported that he departed a private 2,000 feet long grass airstrip known as Doyle's strip. Prior to departure, the pilot selected the left fuel tank. During the initial climb, the engine suddenly quit about 100 feet in the air. The pilot selected an emergency landing area and collided with several trees during the landing. The airplane received damage to the wings, fuselage, and propeller. The pilot indicated that the remanufactured engine that he installed had accrued 25 hours. The airplane was examined by a Federal Aviation Administration (FAA) airworthiness inspector from the Anchorage, Alaska, Flight Standards District Office (FSDO). The inspector reported that the airplane had been rebuilt by the pilot who is not a certificated airframe or powerplant mechanic. The pilot did not posses any airworthiness documentation for the airplane. The postaccident examination of the airplane revealed a kink in the fuel line from the left fuel tank. The fuel line from the fuel strainer to the carburetor was 1/4 inch in diameter. The standard size is 3/8 inch. The fuel caps on each tank are required to have a 3/8 inch vent line. The installed caps had a 1/4 inch vent.