Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Morristown, AZ
While in cruise flight the pilot felt a slight vibration and immediately made a power change without affect. After reducing the engine rpm from 2300 to 2100, the airplane vibrated hard for a split second and then smoothed out. At that point, the propeller had separated from the engine with part of the crankshaft. Metallurgical examination of the crankshaft revealed that the fatigue failure occurred inside the crankshaft bore 1.7 inches forward of the crankshaft oil seal. The point of origin was at two corrosion pits.
failure of the crankshaft due to improper inspection/overhaul procedures.
On March 2, 1997, about 1750 hours mountain standard time, a Beech J35, N39W, was substantially damaged during a forced landing at Morristown, Arizona. The pilot received minor injuries and the passenger received serious injuries. Visual meteorological conditions prevailed for the personal cross-country flight and no flight plan was filed. The pilot reported that while in cruise flight he felt a vibration and immediately made a power change without affect. He further reduced the engine rpm from 2,300 to 2,100, the airplane vibrated hard for a split second and then smoothed out. At that point, the propeller separated from the engine with part of the crankshaft. The failure occurred over remote desert terrain and the propeller was not recovered. ENGINE INFORMATION According to the engine logbook, the engine had been overhauled on April 11, 1989, at 1,819 total hours. At the time of the accident, the engine had accumulated about 937 hours since the overhaul. Postaccident metallurgical examination of the crankshaft revealed that it had failed approximately 1.7 inches forward of the crankshaft oil seal. From this fatigue cracking origin, it propagated at a 45-degree angle to the axis of the crankshaft forward and aft. The origin was located inside the crankshaft bore at two corrosion pits.