Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Yakkama City, FL
The flight was about 25 miles east of the destination airport when the pilot reported that he 'heard maybe 2 seconds of ticking then complete engine failure. He spent about 10 to 15 seconds trying to stop the engine because he thought the engine would 'tear itself off the aircraft.' The pilot chose to make a forced landing in a field. One wing separated from the airplane when it collided with a tree on the approach, and the airplane traveled about 150 feet before it came to a stop. An engine teardown was performed under the supervision of the FAA, and revealed that all 4 connecting rod caps had come apart from their rods. The rod bolt nuts were found lying on the bottom of the oil pan. The investigation revealed that a mechanic had installed two (2) modified rod caps without the connecting rod assemblies, and without inspecting or servicing prior to installation on the engine. .
a complete loss of engine power due to the separation of the connecting rod bolts, resulting in a forced landing and impact with a tree. A factor in this accident was improper installation of the rod bolts by a mechanic.
On May 14, 1997, about 1000 eastern daylight time, a Piper PA-24-180, N7931P, registered to Double Eagle Aircraft Sales Inc., operating as a 14 CFR Part 91 personal flight, crashed while making a forced landing near Yakkama City, Florida. Visual meteorological conditions prevailed and no flight plan was filed. The airplane was substantially damaged. The commercial-rated pilot reported no injuries. The flight originated from Witham Field Airport, Stuart, Florida, about 0830. The pilot stated that he was about 25 miles east of Sarasota, Florida, when the engine lost complete power. He stated that he "heard maybe 2 seconds of ticking then complete engine failure." He further stated that he had just checked the oil temperature and pressure and they were "normal." The pilot said he spent about 10 to 15 seconds trying to stop the engine because he thought the engine would "tear itself off the aircraft." The pilot chose to make a forced landing in a field. One wing separated from the aircraft when it collided with a tree on the approach, and the airplane traveled about 150 feet before it came to a stop. On May 22, 1997, an engine teardown was performed at Aviation Consultants facilities, Wimauma, Florida, under the supervision of the FAA. The engine teardown revealed that all 4 connecting rod caps "had come apart" from their rods. Some of the rod bolt nuts were found lying on the bottom of the oil pan. Some of the nuts were "still installed to the sheared rod bolt." The FAA inspector stated, "...the mechanic...had installed two (2) modified rod caps without the connecting rod assemblies, [and without] incept[ing] and service[ing] prior to installation on the engine."