Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Halstead, KS
The pilot reported that he was making a fourth pass on a field during aerial application when he 'failed to initiate a pull-up in time to clear the powerline.' The right main landing gear struck a wire. The wire cutter located on the right landing gear did not sever the wire. The wire broke in two from the force of the impact with the airplane. The wire on the right side of the airplane broke about 30 feet from the airplane. The wire went underneath the empennage and wrapped itself around the left elevator. The left elevator and horizontal stabilizer were being cut in two until the wire on the left side of the aircraft broke. A 75 foot section of wire trailed the airplane as the pilot continued flying. By applying about 40 pounds of forward stick pressure and not dumping the chemical load, he was able to land at Newton, Kansas. The pilot reported that he was fatigued as a result of working approximately 18 hour days the week prior to the accident.
the pilot failed to maintain adequate clearance from the transmission wires. Factors included the malfunctioning of the wire cutter and pilot fatigue.
On July 28, 1997, at 1145 central daylight time, a Cessna 188B, N4864Q, operated by Blue Sky Airspray, sustained substantial damage while spraying a field when it hit a powerline. The airline transport pilot was able to maintain control of the aircraft and returned to Newton, Kansas, where he landed the airplane. The 14 CFR Part 137 aerial sprayer had departed Newton, Kansas, on a local aerial application flight. The pilot was not injured. Visual meteorological conditions prevailed and no flight plan was filed. The pilot reported that he was making a fourth pass on a field during aerial application and "failed to initiate a pull-up in time to clear the powerline." The right main landing gear struck a wire. The pilot reported that the wire cutter located on the right landing gear did not sever the wire. As the airplane continued forward, the wire broke in two from the force of the impact with the airplane. The wire on the right side of the airplane broke about 30 feet from the airplane. The wire went underneath the empenage and wrapped itself around the left elevator. The left elevator and horizontal stabilizer were being cut in two until the wire on the left side of the aircraft broke. A 75 foot section of wire trailed the airplane as the pilot continued flying. By applying about 40 pounds of forward stick pressure and not dumping the chemical load, he was able to land at Newton, Kansas. The pilot reported that he was fatigued as a result of working approximately 18 hour days the week prior to the accident.