On May 24, 1998, at 1755 mountain daylight time, a Cessna 172A, N9863T, was destroyed when it collided with objects during landing roll near Ten Sleep, Wyoming. The student pilot, the sole occupant aboard, was not injured. The aircraft was being operated by the owner under Title 14 CFR Part 91. Visual meteorological conditions prevailed for the cross-country personal flight which originated approximately 30 minutes before the accident. No flight plan had been filed. According to the pilot, he was landing on a 900 foot landing strip located on his private ranch and overshot the runway. The aircraft collided with a new hangar under construction, then impacted a tractor. The left wing was destroyed, the right wing was bent, the lower cowling was destroyed, the engine mount was broken, the propeller was bent, and the nose gear was sheared. According to the pilot's logbook, the last dual instructional flight and instructor solo endorsement he received was on September 26, 1996, 20 months prior the accident. According to FAR 61.87 (l) (2), "a student pilot may not operate an aircraft in solo flight unless that student pilot has received an endorsement in the student's logbook for the specific make and model aircraft to be flown by an authorized instructor, who gave the training within the 90 days preceding the date of the flight."