Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Covington, GA
The pilot reported that about 10 minutes after takeoff he experienced a loss of indicated engine oil pressure. The engine began to run rough and seized about two miles short of his divert airport. The pilot initiated an emergency landing in a grass field and during the landing rollout, the airplane collided with a fence. Subsequent examination of the engine revealed the No. 3 connecting rod bearing had become unsecured and rotated about its installed location ultimately blocking its lubrication port. The No. 3 connecting rod failed and a hole was observed in the crankcase adjacent to the No. one cylinder.
slippage of the No. 3 connecting rod bearing resulting in blockage of the oil port, oil starvation, and subsequent connecting rod failure. A factor was the fence.
On September 5, 1998, about 1119 eastern daylight time, a Cessna 177RG, N2679V, registered to Mile High Aviators, LLC., operating as a 14 CFR Part 91 personal flight, crashed in a field during a forced landing following an engine failure, near Covington Municipal Airport, Covington, Georgia. Visual meteorological conditions prevailed and no flight plan was filed. The airplane received substantial damage and the private-rated pilot, the sole occupant, was not injured. The flight originated from Atlanta about 1101 the same day. According to the pilot, about 10 minutes after takeoff, just after activating his flight plan to St. Simons Island, Georgia, with Atlanta Approach Control, he experienced a loss of indicated engine oil pressure. The pilot was being vectored to the Covington airport when the engine started to run rough and seized about 2 miles short of the airport. The pilot felt his only option was to execute an emergency landing to a grass field. The airplane collided with a fence on landing rollout. Postcrash examination of the engine by an FAA inspector revealed a large hole in the crankcase next to the No. 1 cylinder, and chunks of metal on top of the heater muff hose. Subsequent disassembly examination of the engine revealed that the No. 3 connecting rod bearing had become unsecured and spun about its installed location, plugging its lubrication oil source, and causing failure of the No. 3 connecting rod. Large chunks of metal within the crankcase and oil system caused subsequent blockage and additional internal failure. (See the Record of Telephone Conversation).