On January 17, 2000, at 1041 central standard time, a Cessna 340A twin-engine airplane, Mexican registration, XBBJU, was substantially damaged during a hard landing at the Brownsville International Airport, Brownsville, Texas. The Mexican commercial pilot, sole occupant, was not injured. Visual meteorological conditions prevailed and a flight plan was not filed for the 14 Code of Federal Regulations Part 91 ferry flight. The cross-country flight originated from Victoria, Mexico, at 0800. According to the airport manager, the pilot stated that he was having "problems with the right engine" while inbound to Brownsville. The airport's tower controller cleared the airplane to land on the active runway. The pilot; however, stated that he was going to land on runway 35 instead. Runway 35 was closed at the time of the landing and, according to the airport manager, workers were on the runway during the airplane's landing. The wind at the time of the landing was from 150 degrees at 9 knots. The airport manager added that while on short final the airplane sank and landed "very hard" at the runway threshold. The airport manager stated that all six of the propeller blades displayed impact damage. Both wings were structurally damaged outboard of the engine nacelles. A post accident inspection conducted by an FAA inspector revealed that both propellers were bent in nearly the same manor "indicating that both engines were turning almost the same during impact." Visual inspection of the right engine showed no anomalies. Fuel was found in the right engine's fuel line, and the cylinders produced "good compression." The engine's tachometer generator was removed and inspected, and no anomalies were noted. In the Pilot/Operator Aircraft Accident Report, NTSB form 6120.1/2, the pilot stated under the section "How Could This Accident Been Prevented" that he should have continued ahead instead of returning to runway 35 after the engine failed.