Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Sand Springs, OK
The commercial pilot planned to practice touch-and-go landings. On the first approach to the runway, the pilot performed a practice go-around. On the second approach, the airplane touched down on the runway and started drifting to the right. The pilot applied left rudder to correct for the drift, but he doesn't recall what happened next. Examination of the accident site by an FAA inspector revealed that there were tire marks on the runway, which went towards the right side of the runway and then made a sharp left turn. The tire marks exited the west side of the runway and continued into a ditch. Subsequently, the airplane became airborne, struck the windsock pole, located about 60-80 yards beyond the ditch, and came to a stop upright. The pilot reported that the wind was calm.
The pilot's failure to maintain aircraft control during landing roll.
On January 22, 2000, at 1720 central standard time, a Piper PA-18A airplane, N1290C, was substantially damaged during landing at the W.R. Pogue Municipal Airport near Sand Springs, Oklahoma. The airplane was owned and operated by private individuals. The commercial pilot and pilot rated passenger sustained minor injuries. Visual meteorological conditions prevailed, and a flight plan was not filed for the 14 Code of Federal Regulations Part 91 personal flight. The flight originated from the Richard Lloyd Jones Jr. Airport near Tulsa, Oklahoma, at 1645. The pilot reported to the NTSB investigator-in-charge that he planned to practice touch-and-go landings. On the first approach to runway 35, he performed a practice go-around. On the second approach, the airplane touched down on the runway and started drifting to the right. He applied left rudder to correct for the drift, but he doesn't recall what happened next. The pilot stated that the wind at the time of the accident was calm. The FAA inspector who went to the accident site reported that he found tire marks on the runway 35 which went towards the right side of the runway and then made a sharp left turn. The tire marks exited the west side of the runway and continued into a ditch. Subsequently, the airplane became airborne, struck the windsock pole located about 60-80 yards beyond the ditch, and came to a stop upright. Examination of the aircraft by the FAA inspector revealed that the firewall was damaged. Both wings and the left horizontal stabilizer were bent, and the tail was twisted and bent. At 1653, the wind at the Tulsa International Airport, located 13 nautical miles east of the accident site, was reported to be from 010 degrees at 7 knots.