Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

March 13, 2000 · Beech A23A · N2337W

Rawlins, WY

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
March 13, 2000
Injury Outcomes
No injuries (1 uninjured)
Location
Rawlins, WY
Aircraft
Beech A23A
Tail Number
N2337W
Injuries
None
Aircraft Damage
Substantial
NTSB Number
DEN00LA058

As the pilot approached Rawlins, Wyoming, he tried contacting the airport on UNICOM several times but without success. He circled the airport several times looking for the wind sock but did not see one. He then decided to land on 'the upslope runway [10].' Halfway down the runway, the pilot applied brakes and then realized the airplane could not be stopped before reaching the end of the runway. He aborted the landing. During the climbout, the airplane struck a fence 100 feet beyond the departure end of the runway. It then struck the ground and slid another 100 feet. Winds recorded at Rawlins at 1250, 10 minutes after the accident, were from 250 degrees at 25 knots. Landing on runway 10 presented a 30 degree right quartering tailwind with a component approximately 23 knots. Density altitude was computed to be 7,157 feet msl, and the maximum expected rate of climb was computed to be 345 feet per minute.

NTSB Probable Cause

The pilot's failure to abort the landing in a timely manner. Factors were the tailwind and high density altitude, resulting in inadequate climb performance.

Full Narrative

On March 13, 2000, approximately 1240 mountain standard time, a Beech A23A, N2337W, was substantially damaged when it struck a fence during initial climb following an aborted landing at Rawlins Municipal Airport, Rawlins, Wyoming. The private pilot, the only occupant aboard, was not injured. Visual meteorological conditions prevailed, and no flight plan had been filed for the personal flight being operated under Title 14 CFR Part 91. The flight originated at Grand Junction, Colorado, at an undetermined time. According to the pilot's accident report, he departed Grand Junction and was en route to Casper, Wyoming, with a refueling stop at Rawlins. As he approached Rawlins, he tried contacting the airport on UNICOM frequency 123.0 mHz several times but without success. He circled the airport several times looking for the wind sock but did not see one. He then decided to land on "the upslope runway [10]." The pilot said "everything [was] normal until the touch down." Halfway down the runway he applied brakes and then realized the airplane could not be stopped before reaching the end of the runway. He aborted the landing. During the climbout, the airplane struck a fence 100 feet beyond the departure end of the runway. It then struck the ground and slid another 100 feet. The landing gear was sheared off, and the airframe was buckled. According to FAA's Airport Facility Directory, a runway gradient is not listed for runway 10. The Directory does list a 1% uphill gradient for runway 04-22. Winds recorded at Rawlins at 1250, 10 minutes after the accident, were from 250 degrees at 25 knots. Landing on runway 10 would present a 30 degree right quartering tailwind with a component approximately 23 knots. Density altitude was computed to be 7,157 feet msl. According to the Beech Aircraft Corporation, the maximum rate of climb that could be expected is 345 feet per minute. Although the pilot said he departed Grand Junction at 1000 and the accident occurred at 1400, FAA's regional operations center in Seattle notified NTSB's Denver field office of the accident at 1348, and reported the accident had occurred at 1240.

Flight

Event TypeAccident
Event Time12:40 MST
Nearest AirportRawlins Municipal (1nm W)
Runway10
Runway Length4320 ft
Runway Width60 ft
Flight Plan FiledNone
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftBeech A23A
Tail NumberN2337W
Aircraft CategoryAir
DamageSubstantial
Operating RulePart 91
Engines1
Engine TypeReciprocating
Engine DetailsContinental · IO-346-A · Reciprocating · 165
Seats4

People & Injuries

Injury SummaryNo injuries (1 uninjured)
Fatal0
Serious0
Minor0
Uninjured1
Total1
Crew 1Age 73 · Third Class

Conditions

ConditionsVMC
LightDaylight
Wind250° @ 25 kt
Visibility60 sm
CeilingBroken clouds 12000 ft
Temperature / Dew Point43 C / 23 C
Altimeter30.00 inHg
Observation Time19:50
Weather SourceWFAC

Appendix: Source Data