Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Sellersburg, IN
The airplane sustained substantial damage during a wheels up landing. The pilot stated, "On the downwind leg gear failed to come down during prelanding checklist. Attempted to recycle the gear down lever, with same results." A FAA on-scene examination revealed that the landing gear powerpack's electric motor was defective. The examination further revealed that during the last annual, a kit to delete the automatic extension features of the landing gear system was incorrectly installed. As installed, the kit would not allow an emergency extension of the landing gear. A FAA inspector stated, "Instructions allowed that once the kit was installed to perform a landing gear retract check to ensure that the operations of the landing gear was satisfactory. [The airplane operator] failed to perform this portion of the operation."
the improper servicing of the emergency extension assembly and the gear extension not verified by company maintenance personnel. Factors were the failure of the hydraulic system's motor, normal and emergency gear extension not available to the pilot, and the wheels up landing performed by the pilot.
On September 1, 2000, at 1830 eastern daylight time, a Piper PA28R-200, N1334T, piloted by a private pilot, sustained substantial damage during a wheels up landing on runway 18 (5,500 feet X 100 feet, dry/asphalt) at Clark County Airport (JVY) near Sellersburg, Indiana. The personal flight was operating under 14 CFR Part 91. Visual meteorological conditions prevailed at the time of the accident. No flight plan was on file. The pilot was uninjured. The local flight departed from JVY at 1600. The pilot stated, "On the downwind leg gear failed to come down during prelanding checklist. Attempted to recycle the gear down lever, with same results." He said, "[An employee] of [the airplane operator] contacted me via UNICOM and we discussed options. After moving to another common freq. (122.95), [the employee] suggested other alternatives such as slow flight with flaps extended to full, wigging the A/C, pull the circuit breaker to see if the hydraulic pressure would bleed off and the gear come down on its own in addition to the emergency checklist alternatives. This all occurred over a period of about 2 hours. At the end of attempting these alternatives, it was decided to gear up land on runway 18. Neither winds nor weather was a factor." Federal Aviation Administration (FAA) inspectors performed an on-scene examination of the airplane. The examination revealed that the landing gear powerpack's electric motor was defective. The examination further revealed that during the last annual, a kit to delete the automatic extension features of the landing gear system was incorrectly installed. As installed, the kit would not allow an emergency extension of the landing gear. A FAA inspector stated, "Instructions allowed that once the kit was installed to perform a landing gear retract check to ensure that the operations of the landing gear was satisfactory. [The airplane operator] failed to perform this portion of the operation."