On September 13, 2000, about 0845 mountain daylight time, a Cessna 120, N2007V, registered to Acme Aviation, and operated by a student pilot, nosed over during landing at Arco-Butte County airport, Arco, Idaho. Visual meteorological conditions prevailed at the time and a visual flight rules flight plan was filed for the 14 CFR Part 91 solo instructional flight. The aircraft was substantially damaged and the student pilot was not injured. The flight departed from Rexburg, Idaho, about 55 minutes prior to the accident. The student pilot reported that prior to landing on runway 06, he checked the wind conditions, via the automated weather reported for the airport, and then verified by the wind socks located at either end of the runway that the winds were calm. The pilot set-up for an approach to runway 06. Just before the aircraft touched down, a gust of wind from the left raised the left wing. The right wing contacted the runway surface and the airplane veered off the right side of the runway and into a ditch. The airplane nosed over and came to rest inverted. The pilot reported that there were no mechanical failures or malfunctions with the airplane at the time of the accident.