Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Minneapolis, MN
The student pilot said that he was returning to Rogers, Minnesota, when he heard a "pop" and then the helicopter yawed left. The student pilot said that he lost pedal control and entered a turning autorotation. He said that at approximately 35 feet above the ground, he introduced some aft cyclic in an attempt to perform a run on landing. He said that the helicopter "spun violently to [the] right". The student pilot said he added full left [control pedal] and down cyclic. The helicopter dropped to the ground. An examination of the helicopter's belt drive system revealed that the lower shaft bearing in the secondary drive unit to the tail rotor was loose and the tail rotor drive belt had come off.
The tail rotor drive belt coming off in cruise flight and it not being possible for the student pilot to maintain aircraft control during the emergency landing attempt. Factors relating to the accident were the loose bearing in the secondary drive unit to the tail rotor, the attempted autorotation and run on landing by the student pilot, and the low altitude.
On May 16, 2001, at 1110 central daylight time, a Parker Rotorway 162F helicopter, N311RM, operated by a student pilot, sustained substantial damage when it impacted into a field 15 miles northwest of Minneapolis, Minnesota, during an emergency landing. Prior to the emergency landing attempt, the helicopter experienced a tail rotor malfunction. Visual meteorological conditions prevailed at the time of the accident. The personal flight was being conducted under the provisions of 14 CFR Part 91. There was no flight plan on file. The student pilot operating the helicopter reported no injuries. The local flight originated from the pilot's residence at Rogers, Minnesota, at 1045. In his written statement, the student pilot said that he was returning to Rogers, Minnesota, when he heard a "pop" and then the helicopter yawed left. The student pilot said that he lost pedal control and entered a turning autorotation. He said that at approximately 35 feet above the ground, he introduced some aft cyclic in an attempt to perform a run on landing. He said that the helicopter "spun violently to [the] right". The student pilot said he added full left [control pedal] and down cyclic. The helicopter dropped to the ground. A Federal Aviation Administration inspector examined the helicopter at the student pilot's residence. The inspector observed that both skids were collapsed, the tail boom was bent upward, the bottom vertical stabilizer was crushed upward, and the tail rotor was bent aft. Control continuity was confirmed. An examination of the helicopter's belt drive system revealed that the lower shaft bearing in the secondary drive unit to the tail rotor was loose and the tail rotor drive belt had come off.