Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Oceano, CA
The airplane lost engine power in the traffic pattern and collided with an airport perimeter fence when it landed short of the runway. The pilot reported that while on the downwind leg of the traffic pattern, he lowered the landing gear. He heard a loud bang from the firewall area, and the instrument panel caved in. The engine lost power, and he maneuvered the airplane towards the airport. The airplane touched down about 500 to 1,000 feet short of the runway, and collided with an airport perimeter fence. A post accident examination of the airplane revealed that the mixture control cable separated at the mixture control arm. The engine control bracket, part number 21189-00, was missing. Without the bracket, the mixture control cable hangs freely down below the engine, where the nose gear is located when in the retracted position. A kink in the mixture cable indicated that it became caught on a Zerk fitting located on the pivot point of the nose landing gear when the nose gear was extended to the down position. This resulted in the mixture control cable separating from the mixture control arm on the carburetor. Maintenance records revealed that the airplane was about 2 months overdue for an annual inspection.
A loss of engine power due to the separation of the mixture control cable from the mixture control arm of the carburetor. The mixture cable separation was due to maintenance personnel's failure to secure the mixture control cable away from the nose landing gear, which resulted in the cable snagging during gear extension. A factor in the accident was the airplane being overdue for an annual inspection.
On January 13, 2002, at 1437 Pacific standard time, a Piper PA-24-250, N328EJ, lost engine power and collided with an airport perimeter fence when it landed short of the runway at Oceano County Airport, Oceano, California. The pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The private pilot, the sole occupant, was not injured; the airplane sustained substantial damage. The personal local flight originated at Oceano about 1415. Day visual meteorological conditions prevailed, and a flight plan had not been filed. The Federal Aviation Administration (FAA) inspector stated that the pilot reported that he was attempting to land on runway 29. While on the downwind leg of the traffic pattern, he lowered the landing gear. He heard a loud bang from the firewall area, and the instrument panel caved in. The engine lost power and he maneuvered the airplane towards the airport. The airplane touched down about 500 to 1,000 feet short of the runway and collided with an airport perimeter fence. The FAA inspector conducted a post accident inspection of the airplane. The examination revealed that the mixture control cable separated at the mixture control arm. The engine control bracket, part number 21189-00, was missing. The function of the bracket is to secure control cables away from the nose landing gear. Without the bracket, the mixture control cable hangs freely down below the engine, where the nose gear is located when in the retracted position. He found a kink in the mixture cable. He thought that this was an indication that it snagged on the nose landing gear hardware when the pilot extended the nose gear to the down position. The evidence suggested that the mixture control cable became caught on the Zerk fitting located on the pivot point of the nose landing gear. This resulted in the mixture control cable separating from the mixture control arm on the carburetor. The FAA inspector's review of maintenance records revealed that the airplane was about 2 months overdue for an annual inspection. The pilot's medical expired about 14 months prior to the accident. The owner/operator failed to file or return a Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1/2).