Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

July 16, 2003 · Diamond Aircraft Industries DA20-C1 Katana · N905CT

Hillsboro, TX

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
July 16, 2003
Injury Outcomes
No injuries (2 uninjured)
Location
Hillsboro, TX
Aircraft
Diamond Aircraft Industries DA20-C1 Katana
Tail Number
N905CT
Operator
Aurora Aviation
Injuries
None
Aircraft Damage
Substantial
NTSB Number
IAD03CA065

During the takeoff roll, as the airplane accelerated through 45-50 knots, the airplane veered abruptly off the right side of the runway. The pilot stated that he then began to rotate to avoid the runway lights. The airplane struck a runway light and settled in a shallow ditch. The pilot reported that he reduced engine power at this time. The airplane then proceeded through the ditch, shearing off the nose landing gear, buckling the main landing gear, and damaging the propeller. The airplane traveled another 20 yards before coming to a stop. The pilot did not report any mechanical malfunctions with the airplane, and an inspection of the accident site and wreckage did not reveal any mechanical malfunctions with the airplane's brakes. Evidence was found to indicate that the airplane departed the runway about 600 feet from the takeoff runway threshold. An automated weather observation at the airport near the time of the accident indicated that the winds were from 120 degrees at 5 knots. The pilot reported that the airplane veered off toward the right during the takeoff roll, and that the wind was blowing toward the left side of the runway. The pilot's total flight experience was reported to be about 73 hours.

NTSB Probable Cause

The pilot's failure to maintain directional control of the airplane during the takeoff roll. A factor in the accident was the pilot's lack of total flying experience.

Full Narrative

On July 15, 2003, about 2030 hours central daylight time, a Diamond DA20-C, N905CT, operated by Aurora Aviation, Inc., Las Vegas, Nevada, was substantially damaged when it impacted a runway light and ditch during the takeoff roll at the Hillsboro Municipal Airport, Hillsboro, Texas. The certificated private pilot and his passenger were not injured. Visual meteorological conditions prevailed at the time of the accident, and no flight plan had been filed. The local personal flight was conducted under 14 CFR Part 91. According to the pilot, the local flight was intended to be no more than 10 minutes in length. A preflight inspection and passenger briefing were performed. The weather conditions were "great," with "minimal wind coming from 090 [degrees]." An engine start, taxi, and run-up were successfully completed with no anomalies noted. The pilot reported that he began his takeoff roll on runway 34, which was paved and 4,000 feet long. He stated that he was, "...prepared for a normal takeoff and began accelerating. Upon reaching about 45-50 knots, aircraft veered abruptly off runway. I began rotation as sufficient speed was present to avoid the runway lights. Aircraft struck one runway light and settled in a shallow ditch running parallel to the runway." The pilot reported that he reduced engine power. The aircraft then "jumped the ditch" while shearing off the nose landing gear and buckling the main landing gear. The propeller was damaged, and the aircraft skidded to the left wing and rotated 180 degrees from the intended direction of takeoff. The aircraft traveled another 20 yards before coming to a stop. The pilot did not report any mechanical malfunctions with the airplane. The pilot reported that at the time of the accident, the wind was blowing from 090 degrees at 3 knots, with gusts to 7 knots. An automated weather observation at the airport near the time of the accident indicated that the winds were from 120 degrees at 5 knots. The pilot reported that the airplane veered off toward the right during the takeoff roll, and that the wind was blowing toward the left side of the runway. The pilot reported that he had accumulated a total of 72.6 hours of flight time, including 25.5 in the Diamond DA-20 airplane. He also reported that he had flown 1.2 hours during the previous 30 days, and 5.1 hours during the previous 90 days. According to a Federal Aviation Administration (FAA) inspector, inspection of the accident site and wreckage did not reveal any mechanical malfunctions with the airplane's brakes. No skid marks were found on the runway. Evidence was found to indicate that the airplane departed the runway about 600 feet from the takeoff runway threshold.

Flight

Event TypeAccident
Event Time20:30 CDT
Nearest AirportHillsboro Municipal (0nm)
Runway34
Runway Length4000 ft
Flight Plan FiledNone
Flight Plan ActivatedNo
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftDiamond Aircraft Industries DA20-C1 Katana
Tail NumberN905CT
Aircraft CategoryAir
DamageSubstantial
OperatorAurora Aviation
Operating RulePart 91
Engines1
Engine TypeReciprocating
Engine DetailsContinental · IO-240-B · Reciprocating

People & Injuries

Injury SummaryNo injuries (2 uninjured)
Fatal0
Serious0
Minor0
Uninjured2
Total2
Crew 1Age 22 · Third Class · None

Conditions

ConditionsVMC
LightDaylight
Wind120° @ 5 kt
CeilingNone
Temperature / Dew Point0 C / 0 C
Altimeter0

Appendix: Source Data