Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Bay Saint Louis, MS
The pilot stated that the flight proceeded to the destination airport where he descended to traffic pattern altitude and entered the downwind leg at a normal 45-degree entry. When abeam the numbers during the downwind leg, he placed the landing gear selector handle to the down position and observed three green lights. He also reported that the airplane slowed as though the extended gear drag was present. The rest of the approach was what he considered typical and at no time was there any indication that something was "amiss." After a typical final approach he reduced power to idle and entered ground effect, then during the flare approximately 2-5 feet above the runway surface, he heard the gear warning horn sound but it was not until the propeller contacted the runway surface did he realize, "...the gear must not have been locked, or must have cycled back into the up position." The airplane came to rest on the right side of the runway. The pilot further stated that after the airplane was raised from the runway, all landing gears were in their respective wheel wells with the doors fully closed. He then entered the cockpit, noted the landing gear motor circuit breaker was popped, and cycled the landing gear selector handle from the down to the up then down position. He then pushed in the landing gear motor circuit breaker, turned on the master switch, and the landing gear extended. The airplane was then towed to the hangar. Following recovery of the airplane, it was placed on jacks and in the presence of an FAA airworthiness inspector, six complete landing gear retraction checks were performed with no discrepancies noted.
The failure of the pilot to verify the landing gear was extended prior to touchdown resulting in a gear-up landing.
On June 27, 2004, about 0730 central daylight time, a Beech V35B, N2167L, registered to a private individual, was landed with the landing gear retracted at the Stennis International Airport, Bay Saint Louis, Mississippi. Visual meteorological conditions prevailed at the time and no flight plan was filed for the 14 CFR Part 91 personal flight from the Mobile Downtown Airport, Mobile, Alabama, to the Stennis International Airport, Bay Saint Louis, Mississippi. The airplane was substantially damaged and the private-rated pilot, the sole occupant, was not injured. The flight originated about 0700, from the Mobile Downtown Airport. The pilot stated that the flight proceeded to the destination airport where he descended to traffic pattern altitude and entered the downwind leg at a normal 45-degree entry. When abeam the numbers during the downwind leg, he placed the landing gear selector handle to the down position and observed three green lights. He also reported that the airplane slowed as though the extended gear drag was present. The rest of the approach was what he considered typical and at no time was there any indication that something was "amiss." After a typical final approach he reduced power to idle and entered ground effect, then during the flare approximately 2-5 feet above the runway surface, he heard the gear warning horn sound but it was not until the propeller contacted the runway surface did he realize, "...the gear must not have been locked, or must have cycled back into the up position." The airplane came to rest on the right side of the runway. The pilot further stated that after the airplane was raised from the runway, all landing gears were in their respective wheel wells with the doors fully closed. He then entered the cockpit, noted the landing gear motor circuit breaker was popped, and cycled the landing gear selector handle from the down to the up then down position. He then pushed in the landing gear motor circuit breaker, turned on the master switch, and the landing gear extended. The airplane was then towed to the hangar. Following recovery of the airplane, it was placed on jacks and in the presence of an FAA airworthiness inspector, six complete landing gear retraction checks were performed with no discrepancies noted.