On July 9, 2005, at 0915 mountain daylight time, a YAK 3UR 2000, N134US, piloted by a airline transport pilot, sustained substantial damage when it impacted terrain during a forced landing near Heber City Airport, Heber City, Utah. Visual meteorological conditions prevailed at the time of the accident. The local personal flight was being conducted under the provisions of Title 14 CFR Part 91 without a flight plan. The pilot and passenger sustained minor injuries. The flight originated in Caldwell, Idaho, and was destined for Heber City, Utah. In a telephone interview, the pilot said that when he turned downwind, the engine lost power. When he attempted to restart the engine, it surged and the torque caused the airplane to roll inverted. The pilot managed to roll the airplane upright, but was unable to restart the engine. He said he "planted" the airplane on the ground. The airplane "bounced ten times" and came to rest 200 to 250 yards from the initial impact point. The engine was torn away from the fuselage. The carburetor was examined at Precision Engines Corporation in Everett, Washington, and a report issued. The report noted that the enrichment cover was leaking, and there was "a substantial leak" at one of the vapor vent ports. One of the vapor vent floats "does not appear to be functioning correctly," the report said. The vapor vent port was plugged and the carburetor was functionally tested. The carburetor tested between 7 and 22 pounds per hour above the rich limit on test points 1 through 16. All other test points were within limits, as was the automatic mixture control.