Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Anchorage, AK
The private certificated pilot was departing a grass surface runway on a Title 14, CFR Part 91 personal flight. The runway was about 3,000 feet long, and about 150 feet wide. The pilot said that during the takeoff run, the engine did not seem to be producing full power. The airplane lifted off to about 10 feet above ground level, but the pilot decided to abort the takeoff and pulled the throttle to idle. The airplane landed hard and began to veer to the left. The pilot said the airplane ground looped to the left, departed off the left side of the runway, and collided with alder bushes. The airplane received structural damage to the right main landing gear, and the left wing and left aileron. The pilot reported that the airplane engine did not have any mechanical malfunction. He said that after the accident, he discovered that the carburetor heat control was in the "on" position.
The pilot's improper use of the carburetor heat control during takeoff, which resulted in a partial loss of engine power, a hard landing, and an on ground encounter with terrain. A factor contributing to the accident was an inadvertent ground loop.
On May 19, 2006, about 1830 Alaska daylight time, a wheel-equipped Helio H-250 airplane, N6324V, sustained substantial damage when it departed the runway surface following an aborted takeoff from a remote airport, about 14 miles northwest of Anchorage, Alaska. The airplane was being operated as a visual flight rules (VFR) local area personal flight under Title 14, CFR Part 91, when the accident occurred. The airplane was operated by the pilot. The private certificated pilot and the sole passenger were not injured. Visual meteorological conditions prevailed, and no flight plan was filed. The flight originated at the Little Su Lodge, and was en route to Merrill Field, Anchorage. During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC), on June 21, 2006, the pilot reported that he was departing toward the south on a grass surface runway that was oriented north/south. The runway was about 3,000 feet long, and about 150 feet wide. The pilot said that during the takeoff run, the engine did not seem to be producing full power. The airplane lifted off to about 10 feet above ground level (agl), but the pilot decided to abort the takeoff and pulled the throttle to idle. The airplane landed hard and began to veer to the left. The pilot said the airplane ground looped to the left, departed off the left side of the runway, and collided with alder bushes. The airplane received structural damage to the right main landing gear, and the left wing and left aileron. The pilot reported that the airplane engine did not have any mechanical malfunction. He said that after the accident, he discovered that the carburetor heat control was in the "on" position. The pilot did not submit a Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1).