Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

December 5, 2007 · Bell UH-1B · N46969

Ennis, MT

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
December 5, 2007
Injury Outcomes
No injuries (1 uninjured)
Location
Ennis, MT
Aircraft
Bell UH-1B
Tail Number
N46969
Injuries
None
Aircraft Damage
Substantial
NTSB Number
SEA08LA043

The pilot reported that he had flown the helicopter for five cycles throughout the day and landed at the landing zone to remove the long line. He was asked by ground personnel to reposition the helicopter from the landing zone to a nearby road in order for a snowplow to access the landing zone. Once the snowplow was done, the pilot began to reposition the helicopter back to the landing zone. As the helicopter lifted from the ground, it began to vibrate, and the vibration turned into a severe "hop or a bounce." The pilot lifted the helicopter to 15 feet; however, it continued to vibrate and subsequently began to nose over and become uncontrollable. The pilot then decided to force land the helicopter and touched down hard in two feet of snow, substantially damaging the doorframe. Inspection of the helicopter revealed that the collective control absolute friction was less than the manufacturer's specified setting and the maintenance manual indicated that if the friction is not set properly, a collective bounce could be induced. No other mechanical anomalies were identified and the reason for the loss of friction could not be determined. The operator's manual indicates that the severity of this oscillation is such that effective control of the helicopter may become difficult to maintain.

NTSB Probable Cause

The loss of collective control friction during takeoff that resulted in a collective bounce oscillation. Contributing to the accident was the pilot's failure to maintain aircraft control during the aborted takeoff and the snow covered terrain.

Full Narrative

On December 5, 2007, at 1600 mountain standard time, a Bell UH-1B, N46969, impacted terrain approximately 33 miles southwest of Ennis, Montana. R & R Conner Aviation LLC was operating the helicopter under the provisions of 14 Code of Federal Regulations Part 91. The pilot was not injured; the helicopter sustained substantial damage. Visual meteorological conditions prevailed and no flight plan was filed for the local positioning flight. According to the pilot, he had flown the helicopter for five cycles throughout the day (about 1.3 to 1.5 hours per cycle) and landed at the landing zone to remove the long line. The pilot was asked by ground personnel to reposition the helicopter from the landing zone to a nearby road, in order for a snowplow to access the landing zone. Once the snowplow was finished, the pilot began to reposition the helicopter to the landing zone. As the helicopter was lifting from the ground, it began to vibrate, that turned into a severe "hop or a bounce." The pilot climbed the helicopter to about 15 feet; however, it continued to vibrate. The helicopter then began to nose over and become uncontrollable. The pilot then decided to force land the helicopter. The helicopter landed hard in two feet of snow and sustained structural damage to the doorframe. The Federal Aviation Administration inspector stated that following the accident, the minimum collective control friction was measured at 8 pounds, and the maintenance manual specified a friction between 14 to 16 pounds. The maintenance manual noted that if the friction is not set properly, a collective bounce (vertical oscillation) could be induced. No other mechanical anomalies were identified and the reason for the loss of friction could not be determined. According to the Operator's Manual for the UH-1B helicopter, "Collective bounce is a pilot induced vertical oscillation that may be encountered in any flight condition by a rapid buildup of vertical bounce at approximately three cycles per second. The severity of this oscillation is such that effective control of the aircraft may become difficult to maintain."

Flight

Event TypeAccident
Event Time16:00 MST
Nearest Airport0nm
Flight Plan FiledNone
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftBell UH-1B
Tail NumberN46969
Aircraft CategoryHeli
DamageSubstantial
Operating RulePart 91
Engines1
Engine TypeTurboshaft
Engine DetailsLycoming · T53-13BA · Turboshaft · 1500
Seats2

People & Injuries

Injury SummaryNo injuries (1 uninjured)
Fatal0
Serious0
Minor0
Uninjured1
Total1
Crew 1Age 39 · Second Class · None

Conditions

ConditionsVMC
LightDaylight
WindCalm
Visibility10 sm
CeilingNone
Temperature / Dew Point23 C / 0 C
Altimeter0
Weather SourcePILO

Appendix: Source Data