Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

August 17, 2009 · Cessna 140A · N9467A

White Plains, NY

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
August 17, 2009
Injury Outcomes
No injuries (1 uninjured)
Location
White Plains, NY
Aircraft
Cessna 140A
Tail Number
N9467A
Operator
Zaber Eli D
Injuries
None
Aircraft Damage
Substantial
NTSB Number
ERA09LA467

The pilot reported that the approach was “on speed,” but upon initial touchdown the airplane bounced. The airplane then landed “firm” and immediately veered off the runway surface. Structural damage to the fuselage resulted. An inspector from the Federal Aviation Administration (FAA) reported that a section of the right main landing gear structure had failed. Postaccident examination of the fracture surface, which was adjacent to a weld line, revealed evidence of a preexisting crack. There was differential rusting on the crack surface indicative of progressive crack extension. The airplane had recently undergone an annual inspection, however the FAA inspector reported that the fracture surface could not be seen without disassembly of the landing gear.

NTSB Probable Cause

The failure of the right main landing gear due to a preexisting crack adjacent to a weld line.

Full Narrative

On August 17, 2009, about 1330 eastern daylight time, a Cessna 140A, N9467A, was substantially damaged during landing at Westchester County Airport (HPN), White Plains, New York. The airplane was operated by a private individual. The commercial pilot was not injured. Visual meteorological conditions prevailed at the time, and no flight plan was filed for the 14 Code of Federal Regulations Part 91 personal flight. The flight originated at East Hampton, New York at 1300. The pilot reported that his approach to runway 34 was stable and on speed. As he began to flare, he sensed that he was slightly high, so he added power, leveled the nose, and flared again. The airplane touched down initially, bounced, and touched down again. The pilot described the landing as "firm." The airplane then "veered uncontrollably off to the left side of the runway." After exiting the airplane, the pilot noted that the right, main landing gear was separated from its gear box. An inspector from the Federal Aviation Administration (FAA) inspected the airplane following the accident. He reported that the right side "bulkhead assembly – landing gear failed. Specifically, the structure immediately under the gear that sandwiches the gear in place failed." The inspector reported that the airplane had recently undergone an annual inspection and the section where the part failed would not be visible without disassembly. The failed landing gear component, which was a welded “C” channel structure, was forwarded to the NTSB Materials Laboratory for inspection. The part had fractures at opposite ends. The fracture at one end of the structure was typical of shearing and tensile overstress separation. The fracture at the other end was adjacent to a weld line. For the majority of this fracture, the features were consistent with an overstress separation. However, a rusted and discolored region at the center leg of the “C” channel was indicative of a preexisting crack. Fracture face recontact damage and differential rusting of the fracture in this region was suggestive of progressive crack extension. The 1356 weather observation for HPN included the following: few clouds at 6,000 feet, surface winds variable at 4 knots, 8 statute miles visibility, temperature 31 degrees Celsius, dew point 19 degrees Celsius, and an altimeter setting of 30.16 inches of mercury.

Flight

Event TypeAccident
Event Time13:30 EDT
Nearest AirportWestchester County (0nm)
Runway34
Runway Length6548 ft
Runway Width150 ft
Flight Plan FiledNone
Flight Plan ActivatedNo
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftCessna 140A
Tail NumberN9467A
Aircraft CategoryAir
DamageSubstantial
OperatorZaber Eli D
Operating RulePart 91
Engines1
Engine TypeReciprocating
Engine DetailsCont Motor · C90 SERIES · Reciprocating · 90
Seats2

People & Injuries

Injury SummaryNo injuries (1 uninjured)
Fatal0
Serious0
Minor0
Uninjured1
Total1
Crew 1Age 66 · Second Class · None

Conditions

ConditionsVMC
LightDaylight
Wind4 kt
Visibility8 sm
CeilingNone
Temperature / Dew Point66 F
Altimeter30.15 inHg
Observation Time17:56
Weather SourceWFAC

Appendix: Source Data