Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Eastsound, WA
The pilot pulled the airplane out of the unheated hangar on a chilly morning and used the propeller to rotate the engine several times. He set the parking brake, and started the airplane with the starter, but then the engine stopped. The battery did not have sufficient charge to start the engine, so he decided to hand-prop the engine. He primed it, left the parking brake on, set the throttle to idle, turned the master switch and magneto switches on, and spun the propeller. The engine started but did not remain running. He started it again by hand propping. He advanced the throttle to keep it running, but again it did not remain running. He applied carburetor heat, but did not reduce the throttle setting. He hand-propped the engine once again and it went to a high rpm setting, and then the airplane began moving forward. The pilot reached in to try to retard the throttle, but was unsuccessful. He fell and hit his face on the landing gear footstep, which fractured his right cheekbone and caused deep lacerations above his right eye. The airplane continued to move until it collided with a hangar, with both wings sustaining substantial damage.
The pilot’s failure to properly secure the airplane prior to rotating the propeller by hand, resulting in inadvertent movement of the airplane and collision with a building.
The pilot pulled the airplane out of the unheated hangar on a chilly morning, and used the propeller to rotate the engine several times. He set the parking brake, and started the airplane with the starter, but then the engine stopped. The battery would not turn the engine over again, so he decided to hand prop the engine. He primed it, left the parking brake on, set the throttle to idle, turned the master switch and magneto switches on, and spun the propeller. The engine started, but quit. He started it again by hand propping. He advanced the throttle to keep it running, but it quit. He applied carburetor heat, but did not reduce the throttle setting. He hand propped the engine once again and it went to a high rpm setting, and then the airplane began moving forward. The pilot reached in to try and retard the throttle, but was unsuccessful. He fell, and hit his face on the landing gear footstep, which fractured his right cheekbone and caused deep lacerations above his right eye. The airplane continued to move until it collided with a hangar, with both wings sustaining substantial damage.