Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

June 14, 2016 · Aero Commander 100 180 180 · N3718X

Port Lavaca, TX

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
June 14, 2016
Injury Outcomes
No injuries (1 uninjured)
Location
Port Lavaca, TX
Aircraft
Aero Commander 100 180 180 (1968)
Tail Number
N3718X
Injuries
None
Aircraft Damage
Substantial
NTSB Number
CEN16LA249

The pilot had departed on a local flight. He reported that, about 15 minutes after takeoff and when the airplane was about 1,100 ft above ground level, he felt a vibration and heard a "bang." The engine subsequently began to lose power. The oil pressure dropped to zero, the pilot heard another "bang," and the propeller stopped turning. The pilot executed a forced landing to a pasture, which resulted in substantial damage to the airplane when the nose landing gear collapsed in soft ground. An engine examination revealed that the No. 4 connecting rod had separated from the crankshaft. However, all fracture surfaces sustained secondary mechanical damage, which precluded further examination. The last engine overhaul was accomplished about 25 years before the accident. The engine manufacturer recommended engine overhauls every 12 years; however, the operator was not required to comply with that recommendation because the airplane was operated under Part 91. Given the available information, the reason for the connecting rod failure could not be determined.

NTSB Probable Cause

Aircraft-Aircraft power plant-Engine (reciprocating)-Recip eng cyl section-Failure - C

Full Narrative

On June 14, 2016, about 0945 central daylight time, an Aero Commander model 100-180 airplane, N3718X, was substantially damage during a forced landing following a loss of engine power near Port Lavaca, Texas. The pilot was not injured. The airplane was registered to and operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91 as a personal flight. The pilot reported that he felt a vibration and heard a "bang" about 15 minutes after takeoff when the airplane was at 1,100 ft above ground level. The engine subsequently began to lose power. The oil pressure dropped to zero as the pilot heard another "bang" and then the propeller stopped turning. He executed a forced landing to a pasture, and the nose landing gear collapsed due to the soft ground. A postaccident airplane examination revealed that the engine mount was damaged. An engine examination determined that the No. 4 connecting rod had separated from the crankshaft. The connecting rod mating flanges common to the rod cap were fractured. A fragment of the bearing was partially extruded around the connecting rod. The rod cap was deformed. A mating portion of one connecting rod flange remained secured to the rod cap by the attachment bolt and nut. The opposite connecting rod flange was fragmented and deformed. The attachment bolt was fractured. The bolt shank exhibited necking adjacent to the fracture surface; the mating portion of the bolt and the nut were not recovered. Three bearing fragments were recovered; each fragment was deformed and appeared worn. All fracture surfaces sustained secondary mechanical damage which precluded further examination. A review of the airplane maintenance records by a Federal Aviation Administration inspector revealed that the most recent engine overhaul was accomplished about 25 years before the accident flight. The engine manufacturer recommended that all engine models be overhauled within 12 years of the "date they first entered service or of last overhaul" in order to "mitigate engine deterioration that occurs with age." However, an aircraft owner is not required comply with the engine manufacturer's recommended overhaul interval when operating under Part 91 unless the engine does not meet the requirements of an annual inspection.

Flight

Event TypeAccident
Event Time09:45 CDT
Nearest AirportCalhoun County (13nm E)
Flight Plan FiledNone
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftAero Commander 100 180 180
Tail NumberN3718X
Aircraft CategoryAir
DamageSubstantial
Operating RulePart 91
Engines1
Engine TypeReciprocating
Engine DetailsLycoming · O-360-A2F · Reciprocating · 180
Seats4

People & Injuries

Injury SummaryNo injuries (1 uninjured)
Fatal0
Serious0
Minor0
Uninjured1
Total1
Crew 1Age 76 · Third Class · None

Conditions

ConditionsVMC
LightDaylight
Wind180° @ 8 kt
Visibility7 sm
CeilingNone
Altimeter29.90 inHg
Observation Time14:35
Weather SourceWFAC

Appendix: Source Data