Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Danville, AR
The noncertificated pilot, who was the owner of the experimental weight shift control aircraft, stated that he was practicing a series of takeoff and landings called "crow hops" when the left main landing gear tire separated from the wheel rim. The aircraft then veered off the runway and rolled onto its side. The pilot stated that the previous airplane owner had put liquid fix-a-flat in the left tire, which is a product not to be used in aircraft tires. The pilot said that liquid fix a flat will corrode the aluminum of the landing gear wheels and allowed the tire to spin on the wheel during braking. Postaccident examination of the airplane revealed the presence of liquid flat repair called "slime," and that the diameter of the main landing gear wheel was relatively small compared to the tire, which likely resulted in slippage of the tire from the wheel.
A separation of the left tire from its wheel because of the use of an improper substance and wheel size, which resulted in a loss of directional control during landing.
On August 3, 2017, at 1200 central daylight time, an experimental amateur-built Ralph Marine Devil Dog, N165AB, veered off the runway and impacted terrain during landing at Danville Municipal Airport (32A), Danville, Arkansas. The airplane sustained substantial damage. The uncertificated pilot was uninjured. The airplane was operated by the pilot and registered to the previous owner under 14 Code of Federal Regulations Part 91 as a personal flight that was not operating on a flight plan. The local flight originated from and was to remain at 32A. The pilot recently purchased the airplane, which was a tricycle, weight-shift control aircraft, that had a 40 mile per hour lift-off speed. The pilot stated that he was practicing takeoffs and landings, which he called "crow hops," on the runway. The pilot intended to fly the airplane along the runway but not enter the airport traffic pattern. He performed four crow hops and during the last landing, the left main landing gear tire became flat and separated from its wheel at a speed of 30 miles per hour. The airplane veered right off the runway surface and into a grass area. The airplane rolled over onto its left side damaging the airplane mast. The pilot stated that the previous airplane owner had put liquid fix-a-flat, which was a product not to be used in aircraft tires, in the left main landing gear wheel. The pilot stated that the liquid fix-a-flat will corrode the aluminum landing gear wheels and would allow the tire to spin on the wheel during braking. Post-accident examination of the airplane by a Federal Aviation Administration inspector revealed the presence of a liquid flat repair substance commonly called "slime" in the left main landing gear wheel and around the inner edges of the tire. The inspector also stated that the diameter of the main landing gear wheel was relatively small compared to the tire.