Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

May 20, 2020 · Bell OH-58A · N153SA

West Branch, MI

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
May 20, 2020
Injury Outcomes
No injuries (2 uninjured)
Location
West Branch, MI
Aircraft
Bell OH-58A (1968)
Tail Number
N153SA
Injuries
None
Aircraft Damage
Substantial
NTSB Number
CEN20LA187

While cruising about 500 feet above ground level, the pilot of the helicopter felt a vibration and entered a precautionary autorotation, though he did not observe any caution or warning lights or horns associated with the vibration. The pilot turned toward an open field for landing and, after clearing some trees, the low rotor rpm horn activated. He reduced collective and made a hard run-on landing, during which the helicopter slid about 20 to 30 ft on its skids before coming to rest upright. The main rotor drooped and one blade struck the tail boom, severing the tail rotor drive shaft and resulting in substantial damage. There was also crush damage to the underside of the tail boom caused by impact forces. The pilot could not describe the location or frequency of the vibration, and the passenger reported that he felt no vibration. Postaccident and follow-up inspections of the helicopter by revealed no anomalies that would have resulted in the vibration. Although the source of the vibration could not be determined, it is likely that the hard landing was the result of the pilot's failure to maintain rotor rpm during the precautionary autorotation.

NTSB Probable Cause

The pilot's failure to maintain rotor rpm during a precautionary autorotation, which resulted in a hard landing. Contributing to the accident was the airframe vibration for reasons that could not be determined because examination of the helicopter revealed no anomalies.

Full Narrative

On May 20, 2020, about 0933 eastern daylight time, an experimental exhibition category Bell OH-58A helicopter, N153SA, was substantially damaged when it was involved in an accident near West Bank, Michigan. The commercial pilot and passenger were not injured. The helicopter was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight. The pilot told Federal Aviation Administration (FAA) inspectors that he and his passenger departed Peach Lake Heliport (89MI), his private heliport for a local flight to Midland, Michigan, to observe recent flood damage. During the return flight, at an altitude of about 500 ft above ground level, the pilot felt an airframe vibration, and he immediately entered a precautionary autorotation. He did not observe any caution or warning lights or horns associated with the vibration. The pilot made a 200° left turn to an open field, and after the helicopter cleared some trees during the approach, the low rotor rpm horn activated. The pilot reduced collective and made a hard run-on landing. The helicopter slid about 20 to 30 ft on its skids before it came to rest upright. The main rotor drooped, and one blade struck the tail boom, severing the tail rotor drive shaft; the underside of the tail boom also sustained impact damage. The pilot could not describe to Federal Aviation Administration inspectors the location or frequency of the vibration, and the passenger reported that he felt no vibration. Postaccident and follow-up inspections by the pilot's mechanic found no evidence of the source of the vibration.

Flight

Event TypeAccident
Event Time09:33 EDT
Nearest Airport0nm
Flight Plan FiledNone
Flight Plan ActivatedUnknown
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftBell OH-58A
Tail NumberN153SA
Aircraft CategoryHeli
DamageSubstantial
Operating RulePart 91
Engines1
Engine TypeTurboshaft
Engine DetailsAllison · 250-C10D · Turboshaft · 420
Seats5

People & Injuries

Injury SummaryNo injuries (2 uninjured)
Fatal0
Serious0
Minor0
Uninjured2
Total2
Crew 1Age 69 · Basc · None

Conditions

ConditionsVMC
LightDaylight
Wind90° @ 4 kt
Visibility10 sm
CeilingNone
Temperature / Dew Point64 F / 41 C
Altimeter30.27 inHg
Observation Time14:35
Weather SourceWFAC

Appendix: Source Data