Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Ashtabula, OH
The intent of the flight was to perform fuel flow and fuel indicator checks on the newly built airplane while taxiing on the ground; however, they were not able to obtain full engine performance on the ground and the pilot elected to take the airplane into the air. After takeoff, while climbing through 200 ft above ground level (agl), the engine lost power. The operator reported that the engine computer circuit breaker had tripped which resulted in the loss of engine power. The pilot attempted to reset the circuit breaker and restart the engine without success. The airplane landed hard on the runway and the left main landing gear collapsed. The left wing sustained substantial damage. A postaccident examination showed that the oxygen sensors used to tune the engine were left on the engine’s cylinder exhaust pipes during the flight. The sensors drew power from the engine’s control computer. During the initial climb, the increased electrical demand to run the oxygen sensors at maximum engine power exceeded the 15-ampere limit on the engine’s control computer, its circuit breaker to tripped, and the engine lost power.
The tripped engine control computer circuit breaker caused by an excessive electrical load on the system, which resulted in a complete loss of engine power during the initial climb.
On July 6, 2021, about 1445 central daylight time, a Titan T-51D airplane, N15180, was substantially damaged when it was involved in an accident near Ashtabula, Ohio. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 test flight. The intent of the flight was to perform fuel flow and fuel indicator checks on the newly-built airplane while taxiing on the ground; however, they were not able to obtain full engine performance on the ground and the pilot elected to take the airplane into the air. After takeoff, while climbing through 200 ft agl, the engine lost power. The pilot reported that the engine computer circuit breaker had tripped and the engine lost power. He attempted to reset the circuit breaker and restart the engine, but the circuit breaker would not reset. The pilot nosed the airplane over to maintain an airspeed of 75 mph and landed on the remaining part of the 5,900-ft runway; however, a high sink rate developed. The airplane landed on the runway hard, and the left main landing gear collapsed. The left wing sustained substantial damage. The airplane’s owner reported that, before the flight, oxygen sensors were installed on the cylinders’ exhaust pipes to determine if the engine was running rich or lean. The sensors received their power from the engine computer. After the accident, data from the Garmin flight director showed increased electrical demand during the maintenance engine runs. During these runs, maximum engine power was never attained due to the inability to secure the airplane in place. The sensors were left installed to collect inflight engine performance information. During the initial climb, the increased engine power placed an increased electrical load on the engine’s control computer that exceeded its 15-ampere rating which tripped the circuit breaker and resulted in the loss of engine power.