Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Hamilton, OH
The pilot was conducting an air medical flight in the helicopter during early morning hours in dark night visual meteorological conditions. About 9 miles out from the intended landing zone, he contacted on-scene fire department personnel and asked for site information. The fire department personnel reported that there were high voltage power lines on the south side of the landing zone. The pilot made an approach and was looking out for the powerlines but could not locate the wires. He was wearing night vision goggles and could see the tower but not the wires. He also could not determine which way the wires were running off the tower. The pilot used the landing light and moved it up and down to try and find the wires but could not locate them. He thought the wires were farther out from the landing zone and not below the helicopter. However, as the helicopter descended for landing, the main rotor blades contacted the wires and the helicopter fell about 30 to 50 ft. All three crew members egressed after the pilot shut down the engines. The helicopter sustained substantial damage to the main rotor blades, main rotor gearbox, and motor mounts; additionally, the left engine was hanging off the side of the helicopter.
The pilot’s decision to continue the landing without having visually identified wires that were known to be in the vicinity of the landing zone, which resulted in a collision with the wires while attempting an off-airport landing in dark night visual meteorological conditions.
On July 26, 2022, at 0455 eastern daylight time, a Eurocopter AS365N3, N520CF, was substantially damaged when it was involved in an accident near Hamilton, Ohio. The pilot and two crew members sustained minor injuries. The helicopter was operated as a Title 14 Code of Federal Regulations Part 135 air medical flight. According to the pilot, he was dispatched to a car accident in Hamilton, Ohio. He checked the weather, approved the flight, and departed for the accident scene around 0428 in dark night visual meteorological conditions. About 9 miles out from the scene, he contacted on-scene fire department personnel, stated that he was a few minutes out, and asked for site information. The fire department personnel reported that there were high voltage power lines on the south side of the landing zone. As the pilot continued to the scene, he knew the winds were calm and, therefore, he orbited the scene from the south to the north. The pilot made an approach from the south and was looking out for the powerlines but could not locate the wires. The pilot stated that he did not think the wires would be in and around the landing zone. He stated that he was wearing night vision goggles and could see the tower but not the wires. Furthermore, he did not know which way the wires were running off the tower. The pilot used the landing light and moved it up and down to try and find the wires but could not locate them. He thought the wires were further out from the landing zone and not below the helicopter. As the helicopter descended, the main rotor blades contacted the wires and the helicopter fell about 30 to 50 ft. All three crew members egressed after the pilot shut down the engines. Postaccident examination of the helicopter by a Federal Aviation Administration inspector revealed that the helicopter struck the high voltage wires, severing one wire, and then landed hard. Portions of each main rotor blade were separated near their mid-span, and the main rotor gearbox and mounts were fractured. The left engine was hanging off the engine motor mounts. The helicopter came to rest on its left side with. The stabilizer was bent and substantially damaged, and the landing gear were impact damaged.