Premium research interface

The modern interface for aviation safety intelligence.

Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.

63k+
Reports indexed
1940-2026
Coverage
Recent
Last data refresh
Featured Report

Loading…

Loading featured report…

Loading…
Open Report

Safety trends by operating rule

Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.

Loading trend charts…

Browse the aviation graph

Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.

Last Data Update

By Decade

By Month

Aircraft Manufacturer

More manufacturers

Airports

More airports

Operators

More operators

About

Aviation safety reports, made easier to study

NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.

The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.

The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.

FAQs

NTSB Report

April 14, 2023 · Cessna 177RG · N7542V

Crestview, FL

Overview

Report Status
Final with probable cause
Event Type
Accident
Date
April 14, 2023
Injury Outcomes
1 injury (1 serious injury)
Location
Crestview, FL
Aircraft
Cessna 177RG (1976)
Tail Number
N7542V
Injuries
Serious
Aircraft Damage
Substantial
NTSB Number
ERA23LA197

The pilot reported that, during a flight in visual conditions, he heard a “boom” from the propeller hub. The propeller immediately began to oscillate and shudder violently, accompanied by severe engine vibration and oil loss. He shut the engine down and executed a forced landing to a field that resulted in structural damage to the airplane. The pilot sustained serious injuries. A teardown examination of the engine after recovery of the wreckage revealed that the No. 1 connecting rod cap separated from the rod during flight, resulting in catastrophic engine damage. Damage to the rod cap bolts and nuts was consistent with the nuts loosening and backing out over time. There was no evidence of heat distress on the affected parts. A review of the aircraft maintenance logbooks revealed that the last overhaul of the engine was performed more than 30 years before the accident. A service instruction issued by the engine manufacturer instructs all engine models to be overhauled within twelve calendar years of the date they first entered service or of the last overhaul.

NTSB Probable Cause

The total loss of engine power due to the loosening and separation of the No. 1 connecting rod cap nuts in flight, resulting in catastrophic internal engine damage. Contributing to the accident was the pilot/owner’s failure to comply with the engine manufacturer’s service instruction on engine overhaul intervals.

Full Narrative

On April 14, 2023, about 1440 eastern daylight time, a Cessna 177RG, N7542V, was substantially damaged when it was involved in an accident near Crestview, Florida. The pilot was seriously injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot reported that he departed Destin Executive Airport (DTS), Destin, Florida, to practice RNAV and ILS approaches in visual flight rules conditions at the Bob Sikes Airport (CEW), Crestview, Florida. The airplane departed DTS and flew toward CEW without incident; however, shortly after the pilot was cleared for his first practice approach, he heard a “boom” from the propeller hub. The propeller immediately began to shudder violently and oscillate in a semi-oval pattern. The fuselage also began to vibrate intensely, and the pilot observed oil on the propeller hub, which subsequently coated the windshield and impaired visibility. The pilot elected to shut down the engine and identified a field for a forced landing; however, as he approached the field he noticed obstacles and a marsh. He kept the landing gear retracted and landed in an area of cut trees. After touchdown, the airplane slid approximately 100 ft before coming to a stop. An inspector with the Federal Aviation Administration responded to the accident site and examined the wreckage. The engine firewall was buckled, with complete structural failure at the engine mounts. The left, outboard wing section was bent upward, and the vertical stabilizer leading edge and horizontal stabilator were buckled. There was damage to the lower fuselage and the landing gear was completely retracted. Oil was present in the engine; however, the engine was tilted forward in the mount so an accurate quantity could not be established. There was evidence of oil leakage on the right side of the aircraft. The wreckage was recovered to a storage facility where an additional examination was performed. During the engine examination, the propeller was rotated manually through 90° of travel before it stopped and could not be rotated further. The oil suction screen contained about a teaspoon of metallic flakes, and metal particles were present throughout the pleats of the oil filter element. The No. 3 cylinder was removed and the No. 3 connecting rod beam was cut to gain access to the rear portion of the engine interior. Damage to the cylinder skirts of the Nos. 1, 2, and 4 cylinders prevented their removal. The No.1 cylinder barrel was cut and the cylinder removed from the engine. The No.1 connecting rod was found separated from the No.1 crankshaft rod journal and damaged from impact with the internal engine components. The No.1 rod cap was found to be damaged and found inside the engine crankcase. Two portions of the No.1 connecting rod were also found inside the crankcase with rod bolt holes. Both rod bolt threaded ends were found in the crankcase. No rod nuts were observed on the threaded ends. A portion of a threaded rod nut was observed inside the crankcase. Fragments of the No.1 rod bearings were found inside the crankcase. The No.1 crankshaft rod journal did not exhibit scoring or discoloration consistent with overheating. No indications of overheating of the other rod journals or crankshaft journals were observed. A review of the aircraft maintenance logbooks revealed that, as of the last annual inspection on September 16, 2022, the engine had accumulated 1,624.61 hours since its last overhaul. The pilot, who owned the airplane, purchased it on September 10, 2021. That overhaul was completed on February 28, 1993, more than 30 years before the accident. According to Lycoming Service Instruction No. 1009BE, dated April 24, 2020, “all engine models are to be overhauled within twelve (12) calendar years of the date they first entered service or of last overhaul. This calendar year time period TBO is to mitigate engine deterioration that occurs with age, including corrosion of metallic components and degradation of non-metallic components such as gaskets, seals, flexible hoses and fuel pump diaphragms.”

Flight

Event TypeAccident
Event Time14:40 CDT
Nearest Airport0nm
Flight Plan FiledNone
Flight Plan ActivatedNo
Aircraft FireNo
Aircraft ExplosionNo

Aircraft

AircraftCessna 177RG
Tail NumberN7542V
Aircraft CategoryAir
DamageSubstantial
Operating RulePart 91
Engines1
Engine TypeReciprocating
Engine DetailsLycoming · IO-360-A1B6D · Reciprocating · 200
Seats4

People & Injuries

Injury Summary1 injury (1 serious injury)
Fatal0
Serious1
Minor0
Uninjured0
Total1
Crew 1Age 54 · Third Class · Serious

Conditions

ConditionsVMC
LightDaylight
WindCalm
Visibility10 sm
CeilingNone
Temperature / Dew Point55 F
Altimeter29.91 inHg
Observation Time14:53
Weather SourceWFAC

Appendix: Source Data