Overall Trends
Total, fatal, and serious accidents in the selected range.
Search investigations, review source evidence, monitor watched reports, and trace long-term patterns from one calm, data-first workspace.
Fast key and full-text search with live filters, watches, and precise metadata.
Use quotes for exact phrase matches (for example "fuel selector valve").
Track fatal and non-fatal accident patterns across Part 91, Part 135, and Part 121 operations.
Major cases, deep-report coverage, and investigation media across decades of NTSB history.
Move quickly by aircraft, airport, operator, and time with indexes built for research, not wandering.
NTSB Reports is an independent research and search tool for public aviation accident and incident records. It brings NTSB aviation reports, structured fields, docket files, extracted figures, photos, videos, and update history into one searchable interface.
The goal is practical safety education: make it faster to find relevant investigations, compare similar events, review factual records, and understand the evidence behind probable-cause and preliminary reports.
The investigative work and source records belong to the National Transportation Safety Board and the published investigation record. This site is not affiliated with or endorsed by the NTSB.
Prospect, TN
The pilot was performing a cross-country flight when there was a “sudden severe engine vibration and loss of power.” He reduced the throttle in an attempt to lessen the engine vibration and elected to land the airplane in a soybean field since he was unsure if he could clear a large, forested area between him and the next closest airport. After touchdown, the nose landing gear struck a ditch, separated, and the airplane nosed over, coming to rest inverted. An examination of the engine after the accident revealed the No. 6 cylinder exhaust valve rocker boss was fractured and loose inside the rocker cover. The boss was fractured in two places. Metallurgical examination revealed one of the fractured bosses failed from fatigue that initiated at multiple sites along the bore surface that had been in contact with the rocker arm. A review of the maintenance logbooks revealed that the engine cylinders were removed, overhauled, and reinstalled about 3 years and 4 months before the accident, and the airplane had accrued about 154 hours total time since the cylinders were overhauled.
A loss of engine power due to the fatigue failure of the No. 6 cylinder exhaust valve rocker boss.
On September 14, 2023, about 1300 central daylight time, a Cessna 182P airplane, N8443M, was substantially damaged when it was involved in an accident near Prospect, Tennessee. The private pilot and one passenger sustained minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot was performing a cross-country flight from Tuscaloosa National Airport (TCL), Tuscaloosa, Alabama, to Lebanon Municipal Airport (M54), Lebanon, Tennessee. About 1 hour into the flight, at 3,500 ft mean sea level, there was a “sudden severe engine vibration and loss of power.” He reduced the throttle to lessen the engine vibration. He elected to land the airplane in a soybean field since he was unsure if he would clear a large, forested area between him and the next closest airport. After touchdown in the soybean field, the nose landing gear struck a ditch, separated, and the airplane nosed over, coming to rest inverted. He called 911 and was met by first responders. Federal Aviation Administration inspectors responded to the accident site and examined the wreckage. The wreckage was found inverted, in the soybean field. There was no fire. The fuselage and empennage were substantially damaged. After recovery of the wreckage, the engine was examined on the airframe. The rocker covers were removed to examine the cylinder heads and check valve action. The Nos. 1-5 cylinders were normal in appearance and the valve action was correct. When the rocker cover for the No. 6 cylinder was removed, pieces of the exhaust valve rocker boss, the rocker, washers, and the rocker shaft were loose inside. The exhaust valve was closed. The rocker boss was fractured in two places. The loose parts recovered from the No. 6 cylinder were sent to the National Transportation Safety Board Materials Laboratory for examination. One of the rocker boss fragments exhibited features consistent with fatigue that initiated at multiple sites along the bore surface that had been in contact with the arm. The other boss fragment was fractured from overstress, exhibiting features consistent with rapid fracture of an aluminum casting. A review of the engine logbook revealed that the engine cylinders were removed, overhauled, and reinstalled on May 18, 2020, at 2,609.8 hours total aircraft time. At the time of the accident, the airplane had accrued about 154 hours since the cylinders were overhauled.